PC/TP-GP2-G20

PC/TP-GP2-G20

Manufacturer:Not recorded

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.35g/cm³
Melt flow rate7.5g/10min
Tensile strength72.4MPa
Flexural strength121.0MPa
Flexural modulus4688.0MPa
Notched impact strength107.0kJ/m²
HDT 1.8MPa116.0°C
HDT 0.45MPa110.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 104 - 110 °C; time 4 - 6 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 260 - 288 °C; mold temperature 65.6 - 87.8 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1