PC-CF20

PC-CF20

Manufacturer:Not recorded

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.31g/cm³
Tensile strength135.0MPa
Tensile modulus13000.0MPa
Elongation at break1.5%
Flexural strength185.0MPa
Flexural modulus11500.0MPa
Notched impact strength7.0kJ/m²
HDT 1.8MPa147.0°C
HDT 0.45MPa149.0°C
Vicat softening point151.0°C
Flame rating{'1.5_mm_thickness': 'V-0 class', '0.8_mm_thickness': 'V-2 class'}—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 120 °C; time >5 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 290 - 320 °C; mold temperature 80 - 120 °C. Verify the source, grade and conditions.
Applications
Candidate application areas in the source: electrical and electronics. Verify the source, exact use and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1
  • Application areas:page 1