PC-GF
ELCRIN™ EXL5689B
Manufacturer：沙特基础工业公司
阻燃，无卤，高冲击或冲击改性，紫外稳定或耐候性好
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.26 | g/cm³ |
| Melt flow rate | 9.0 | g/10min |
| Tensile strength | 54.0 | MPa |
| Tensile modulus | 3600.0 | MPa |
| Elongation at break | 13.0 | % |
| Flexural modulus | 3400.0 | MPa |
| Notched impact strength | 30.0 | kJ/m² |
| HDT 1.8MPa | 132.0 | °C |
| Vicat softening point | 145.0 | °C |
| Flame rating | {'UL94_V0': '1.5mm', 'V0': '1.5mm', 'GWFI': '960°C', 'GWIT': '960°C', 'UL_94_Flame_rating': 'V-1'} | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 120 °C; time 3 - 4 h; processing moisture ≤0.02 %. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 270 - 330 °C; mold temperature 80 - 115 °C. Verify the source, grade and conditions.
- Applications
- Candidate application areas in the source: electrical and electronics, construction. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 2
- Drying time：page 2
- Processing moisture：page 2
- Melt temperature：page 2
- Mold temperature：page 2
- Application areas：page 2
