GF 30 FR 5 black

PCT-GF30

Manufacturer:Not recorded

阻燃

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.72g/cm³
Melt flow rate25.0g/10min
Tensile strength100.0MPa
Tensile modulus11900.0MPa
Elongation at break1.2%
Flexural modulus7750.0MPa
Notched impact strength5.0kJ/m²
HDT 1.8MPa240.0°C
HDT 0.45MPa250.0°C
Vicat softening point250.0°C
Flame ratingV-0—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 100 °C; time 4 - 6 h; processing moisture ≤0.03 %. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 290 - 310 °C; mold temperature 90 - 120 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Processing moisture:page 2
  • Melt temperature:page 2
  • Mold temperature:page 2