Polycarbonate

CALIBRE™ 303V-10

Manufacturer:Not recorded

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.2g/cm³
Melt flow rate10.0g/10min
Tensile strength527.0MPa
Tensile modulus2300.0MPa
Elongation at break527.0%
Flexural strength178.0MPa
Flexural modulus2400.0MPa
Notched impact strength179.0kJ/m²
HDT 1.8MPa75.0°C
Vicat softening point306.0°C
Flame rating{'UL_94_Flame_rating': 'V-2', 'class': 'V-2', 'thickness_tested': '1.6 mm', 'IEC_60695-11-10': {'thickness_tested': '1.5 mm', 'class': 'V-2'}, 'ISO_4589-1/-2': {'oxygen_index': '26%'}}—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
No drying value was confirmed by extraction; review the source.
Equipment setup
No equipment setting was confirmed by extraction; review the source.
Applications
Candidate application areas in the source: electrical and electronics. Verify the source, exact use and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Application areas:page 2