PC (聚碳酸酯)
FPC 724 HF
Manufacturer：联邦塑料公司
拉伸模量，屈服强度，屈服延伸率，断裂延伸率，弯曲模量，弯曲强度，缺口冲击，UL 94 燃烧等级，热膨胀系数，264 psi 下热变形温度，最大使用温度（间断），吸水率，密度
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.2 | g/cm³ |
| Melt flow rate | 16.0 | g/10min |
| Tensile strength | 59.3 | MPa |
| Tensile modulus | 2344.0 | MPa |
| Elongation at break | 7.0 | % |
| Flexural strength | 93.8 | MPa |
| Flexural modulus | 2344.0 | MPa |
| Notched impact strength | 123.0 | kJ/m² |
| HDT 1.8MPa | 149.0 | °C |
| Flame rating | HB | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.
- Storage
- Confirm packaging, temperature and humidity, shelf life, and handling after opening.
- Drying
- Confirm whether drying is required, plus temperature, time, dew point and target moisture.
- Equipment setup
- Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
- Applications
- Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.
