PC

Makrolon® Ai2455

Manufacturer:Not recorded

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Melt flow rate19.0g/10min
Tensile strength66.0MPa
Tensile modulus2400.0MPa
Elongation at break120.0%
Flexural strength98.0MPa
Flexural modulus2350.0MPa
HDT 1.8MPa124.0°C
HDT 0.45MPa136.0°C
Vicat softening point143.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 120 °C. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 280 - 320 °C; mold temperature 80 °C. Verify the source, grade and conditions.
Applications
Candidate application areas in the source: automotive. Verify the source, exact use and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1
  • Application areas:page 1