PC
PC-10FRN-(VMI2R) GY
Manufacturer：Amco聚合物
{'application_cn': '电气和电子', 'delivery_form_cn': '颗粒', 'additives_cn': {'release_agent_cn': '特殊', 'flame_retardant_cn': '是', 'high_impact_or_impact_modified_cn': '是', 'u_v_stabilized_or_stable_to_weather_cn': '是'}, 'certifications_cn': '符合RoHS标准'}
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.23 | g/cm³ |
| Melt flow rate | 18.0 | g/10min |
| Tensile strength | 58.6 | MPa |
| Elongation at break | 75.0 | % |
| Flexural modulus | 2137.0 | MPa |
| Notched impact strength | 240.0 | kJ/m² |
| HDT 1.8MPa | 125.0 | °C |
| Flame rating | {'burning_behav_5v_at_thickness_h': '5VA class', 'glow_wire_flammability_index_gwfi': '960 °C', 'glow_wire_ignition_temperature_gwit': '777 °C', 'ul_94_flame_rating': 'V-0'} | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 121 °C; time 4 h. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 282 - 304 °C; mold temperature 71.1 - 93.3 °C. Verify the source, grade and conditions.
- Applications
- Candidate application areas in the source: electrical and electronics. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 1
- Drying time：page 1
- Melt temperature：page 1
- Mold temperature：page 1
- Application areas：page 2
