High Density Polyethylene (HDPE)
PE-HD-GF30_Terralene® GF30
Manufacturer：FKuR塑料公司
包含可再生资源
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.16 | g/cm³ |
| Melt flow rate | 11.0 | g/10min |
| Tensile strength | 43.0 | MPa |
| Tensile modulus | 4740.0 | MPa |
| Elongation at break | 2.1 | % |
| Notched impact strength | 5.6 | kJ/m² |
| Vicat softening point | 124.0 | °C |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 60 °C; time 2 - 4 h. Verify the source, grade and conditions.
- Equipment setup
- No equipment setting was confirmed by extraction; review the source.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 1
- Drying time：page 1
