PE-HD
Marlex® 9503H
Manufacturer：雪佛龙菲利普斯化学公司LP
吹塑成型, 抗静电, 高冲击或冲击改性, 低气味, 共聚物, 己烯共聚物, 环境应力开裂抵抗性, 食品接触, 食品批准FDA 21 CFR
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 0.946 | g/cm³ |
| Melt flow rate | 0.31 | g/10min |
| Tensile strength | 24.8 | MPa |
| Elongation at break | 500.0 | % |
| Flexural modulus | 1034.0 | MPa |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- No drying value was confirmed by extraction; review the source.
- Equipment setup
- No equipment setting was confirmed by extraction; review the source.
- Applications
- Candidate application areas in the source: packaging. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Application areas：page 1
