High Density Polyethylene (HDPE)
PE-HD_UNIVAL™ DMDG-6240 NT 7
Manufacturer：陶氏化学公司
低气味，熔融强度，一般化学耐受性，环境应力开裂耐受性
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 0.946 | g/cm³ |
| Melt flow rate | 0.4 | g/10min |
| Tensile strength | 23.8 | MPa |
| Elongation at break | 770.0 | % |
| Flexural modulus | 1150.0 | MPa |
| HDT 1.8MPa | 62.8 | °C |
| Vicat softening point | 121.0 | °C |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- No drying value was confirmed by extraction; review the source.
- Equipment setup
- No equipment setting was confirmed by extraction; review the source.
- Applications
- Candidate application areas in the source: packaging, medical. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Application areas：page 1
