Looking for a reliable supplier or an alternative grade? Tell us what you need

Polyetherimide (PEI)

THERMOCOMP™ Compound PDXE00715EES

Manufacturer:Not available in English

Healthcare

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.36g/cm³
Tensile strength127.0MPa
Tensile modulus4990.0MPa
Elongation at break5.8%
Flexural strength202.0MPa
Flexural modulus5080.0MPa
Notched impact strength5.2kJ/m²
HDT 1.8MPa211.0°C
HDT 0.45MPa205.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 121 °C; processing moisture ≤0.02 %. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 360 - 365 °C; mold temperature 121 - 148 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Processing moisture:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1