PEI
HU1110
Manufacturer：ULTEM™
增强流动性的聚醚酰亚胺（Tg 217°C）。符合ECO规范。适用于医疗设备和制药应用。健康变更管理；生物相容性（ISO 10993或USP Class VI）；食品接触合规；蒸汽、伽马射线、环氧乙烷和电子束灭菌。
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.36 | g/cm³ |
| Melt flow rate | 16.0 | g/10min |
| Tensile strength | 110.0 | MPa |
| Tensile modulus | 3500.0 | MPa |
| Elongation at break | 50.0 | % |
| Flexural modulus | 3300.0 | MPa |
| Notched impact strength | 5.0 | kJ/m² |
| HDT 1.8MPa | 210.0 | °C |
| Vicat softening point | 205.0 | °C |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 150 °C; time 4 - 6 h; processing moisture ≤0.02 %. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 350 - 400 °C; mold temperature 135 - 165 °C. Verify the source, grade and conditions.
- Applications
- Candidate application areas in the source: medical. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 1
- Drying time：page 1
- Processing moisture：page 2
- Melt temperature：page 2
- Mold temperature：page 2
- Application areas：page 2
