聚醚酰亚胺
ULTEM™ Resin HU2300 PEI-GF30
Manufacturer：沙特基础工业公司
生物相容性, 耐蒸汽灭菌, 耐过氧化氢灭菌, 耐伽马射线灭菌, 耐环氧乙烷灭菌, 耐紫外线-C, 耐电子束灭菌, 全球食品合规, RoHS合规, 无卤素, 耐高温, 不透明
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.51 | g/cm³ |
| Melt flow rate | 5.0 | g/10min |
| Tensile strength | 175.0 | MPa |
| Tensile modulus | 10500.0 | MPa |
| Elongation at break | 2.4 | % |
| Flexural modulus | 9600.0 | MPa |
| Notched impact strength | 10.0 | kJ/m² |
| HDT 1.8MPa | 215.0 | °C |
| Vicat softening point | 225.0 | °C |
| Flame rating | UL94 V0 and 5VA | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.
- Storage
- Confirm packaging, temperature and humidity, shelf life, and handling after opening.
- Drying
- Confirm whether drying is required, plus temperature, time, dew point and target moisture.
- Equipment setup
- Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
- Applications
- Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.
