PLA+PSAC
F28i
Manufacturer：Inzea
含有可再生资源，生物可降解，食品接触，食品批准 10/2011，ISO 13432 (生产商) 可堆肥，ISO 13432 (证书) 可堆肥
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Tensile strength | 38.0 | MPa |
| Tensile modulus | 2200.0 | MPa |
| Elongation at break | 25.0 | % |
| Flexural modulus | 1900.0 | MPa |
| Notched impact strength | 10.5 | kJ/m² |
| HDT 1.8MPa | 60.0 | °C |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 50 °C. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 170 - 180 °C. Verify the source, grade and conditions.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 1
- Melt temperature：page 1
