PMMA-I
PLEXIGLAS® Resist zk5HF
Manufacturer：罗姆公司
非晶态，高冲击改性，光稳定或耐光，耐候稳定，透明
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.17 | g/cm³ |
| Melt flow rate | 8.1 | g/10min |
| Tensile strength | 55.0 | MPa |
| Tensile modulus | 2500.0 | MPa |
| Elongation at break | 25.0 | % |
| HDT 1.8MPa | 93.0 | °C |
| HDT 0.45MPa | 102.0 | °C |
| Vicat softening point | 96.0 | °C |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 85 °C; time 2 - 3 h. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 220 - 260 °C; mold temperature 50 - 70 °C. Verify the source, grade and conditions.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 2
- Drying time：page 2
- Melt temperature：page 2
- Mold temperature：page 2
