PMMA
PLEXIGLAS® Heatresist FT15
Manufacturer：罗姆公司
光稳定或耐光，紫外线稳定或耐候，耐热稳定或耐热，透明
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.11 | g/cm³ |
| Melt flow rate | 4.5 | g/10min |
| Tensile strength | 50.0 | MPa |
| Tensile modulus | 3500.0 | MPa |
| Elongation at break | 3.1 | % |
| HDT 1.8MPa | 105.0 | °C |
| HDT 0.45MPa | 107.0 | °C |
| Vicat softening point | 115.0 | °C |
| Flame rating | HB class | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 100 °C; time 4 - 6 h. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 220 - 250 °C; mold temperature 60 - 90 °C. Verify the source, grade and conditions.
- Applications
- Candidate application areas in the source: automotive. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 2
- Drying time：page 2
- Melt temperature：page 2
- Mold temperature：page 2
- Application areas：page 1, 2
