Amorphous thermoplastic molding compound
PLEXIGLAS® Optical POQ64
Manufacturer:Not available in English
Excellent light transmission, good weather resistance, high mechanical strength, surface hardness, mar resistance, guaranteed purity and clarity, very good flow properties, optimized mold release behavior, high luminous efficiency in medium to long light paths
Recorded properties
Record date:2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.19 | g/cm³ |
| Tensile strength | 65.0 | MPa |
| Tensile modulus | 3300.0 | MPa |
| Elongation at break | 3.0 | % |
| HDT 1.8MPa | 97.0 | °C |
| Vicat softening point | 104.0 | °C |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 90 °C; time 2 - 3 h. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 220 - 240 °C; mold temperature 60 - 90 °C. Verify the source, grade and conditions.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature:page 2
- Drying time:page 2
- Melt temperature:page 2
- Mold temperature:page 2