PPA-CF30_XECARB® 12-C30-HT

PPA-CF30_XECARB® 12-C30-HT

Manufacturer:Xenia Srl

注塑成型

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.23g/cm³
Tensile strength220.0MPa
Tensile modulus20500.0MPa
Elongation at break2.3%
Flexural strength330.0MPa
Flexural modulus15500.0MPa
Notched impact strength62.0kJ/m²
HDT 1.8MPa230.0°C
HDT 0.45MPa155.0°C
Vicat softening point240.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 80 - 100 °C; time 6 - 8 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 285 - 305 °C; mold temperature 95 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1