Polyphenylene Ether (PPE) + Polyamide (PA)
GTX4610
Manufacturer：NORYL GTX™
非溴化/非氯化阻燃剂包覆，UL746C户外适用性等级为F1，优异的化学抗性，高热抗性，高流动，激光焊接
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.21 | g/cm³ |
| Melt flow rate | 18.0 | g/10min |
| Tensile strength | 88.0 | MPa |
| Tensile modulus | 5000.0 | MPa |
| Elongation at break | 3.0 | % |
| Flexural modulus | 4600.0 | MPa |
| Notched impact strength | 5.0 | kJ/m² |
| HDT 1.8MPa | 220.0 | °C |
| HDT 0.45MPa | 224.0 | °C |
| Vicat softening point | 218.0 | °C |
| Flame rating | UL 5VA | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 95 - 105 °C; time 3 - 4 h; processing moisture ≤0.07 %. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 280 - 305 °C; mold temperature 75 - 120 °C. Verify the source, grade and conditions.
- Applications
- Candidate application areas in the source: automotive. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 2
- Drying time：page 2
- Processing moisture：page 2
- Melt temperature：page 2
- Mold temperature：page 2
- Application areas：page 2
