PPE+PP-GF40
PPX640
Manufacturer：NORYL PPX™
高刚度，温度性能，冲击抵抗，水解稳定性，尺寸稳定性，良好的化学性能
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.3 | g/cm³ |
| Melt flow rate | 3.0 | g/10min |
| Tensile strength | 100.0 | MPa |
| Tensile modulus | 9700.0 | MPa |
| Elongation at break | 2.2 | % |
| Flexural modulus | 8500.0 | MPa |
| Notched impact strength | 14.0 | kJ/m² |
| Vicat softening point | 138.0 | °C |
| Flame rating | 750°C (GWFI) | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 65 - 75 °C; time 2 - 4 h; processing moisture ≤0.02 %. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 260 - 305 °C; mold temperature 40 - 65 °C. Verify the source, grade and conditions.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 1
- Drying time：page 1
- Processing moisture：page 1
- Melt temperature：page 1
- Mold temperature：page 1
