Polyphenylene Ether (PPE) + High Impact Polystyrene (HIPS)

PX138H

Manufacturer:诺里尔

低吸水率,高强度,水解稳定性,低翘曲,低密度,尺寸稳定性

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.23g/cm³
Melt flow rate2.7g/10min
Tensile strength90.0MPa
Tensile modulus6000.0MPa
Elongation at break3.0%
Flexural modulus5400.0MPa
Notched impact strength8.0kJ/m²
HDT 1.8MPa135.0°C
Vicat softening point143.0°C
Flame ratingHB class IEC 60695-11-10—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.

Storage
Confirm packaging, temperature and humidity, shelf life, and handling after opening.
Drying
Confirm whether drying is required, plus temperature, time, dew point and target moisture.
Equipment setup
Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
Applications
Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.