PPE/PS blend

ZX08309

Manufacturer:LNP THERMOCOMP™

高介电常数和低损耗正切

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.66g/cm³
Melt flow rate11.0g/10min
Flexural modulus3500.0MPa
Notched impact strength60.0kJ/m²
HDT 1.8MPa134.0°C
HDT 0.45MPa122.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 105 °C; time 3 - 5 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 295 - 305 °C; mold temperature 90 °C. Verify the source, grade and conditions.
Applications
Candidate application areas in the source: automotive. Verify the source, exact use and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1
  • Application areas:page 1