Blend

NORYL™ Resin BN9003G

Manufacturer:沙特基础工业公司

聚苯醚(PPE) + 高冲击聚苯乙烯(HIPS)

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.06g/cm³
Melt flow rate10.0g/10min
Tensile strength47.0MPa
Tensile modulus2170.0MPa
Elongation at break30.4%
Flexural modulus2190.0MPa
Notched impact strength26.0kJ/m²
HDT 1.8MPa110.0°C
HDT 0.45MPa126.0°C
Vicat softening point127.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 80 - 85 °C. Verify the source, grade and conditions.
Equipment setup
No equipment setting was confirmed by extraction; review the source.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 2