PPE+PS
NORYL™ Resin NH7010
Manufacturer:沙特基础工业公司
阻燃
Recorded properties
Record date:2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.09 | g/cm³ |
| Melt flow rate | 10.1 | g/10min |
| Tensile strength | 69.0 | MPa |
| Tensile modulus | 2500.0 | MPa |
| Elongation at break | 8.4 | % |
| Flexural modulus | 2520.0 | MPa |
| Notched impact strength | 21.0 | kJ/m² |
| HDT 1.8MPa | 139.0 | °C |
| Vicat softening point | 161.0 | °C |
| Flame rating | {'UL94_flame_rating_2mm': '5VA', 'UL94_flame_rating_1.5mm': 'V0', 'UL746C_Outdoor_Suitability': 'F1'} | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 110 - 120 °C; time 3 - 4 h; processing moisture ≤0.02 %. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 300 - 325 °C; mold temperature 80 - 110 °C. Verify the source, grade and conditions.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature:page 2
- Drying time:page 2
- Processing moisture:page 2
- Melt temperature:page 2
- Mold temperature:page 2