modified polyphenylene ether
PX1860
Manufacturer：NORYL™
未填充，注塑成型，良好的尺寸稳定性，高流动性
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.1 | g/cm³ |
| Melt flow rate | 34.0 | g/10min |
| Tensile strength | 52.0 | MPa |
| Tensile modulus | 2510.0 | MPa |
| Elongation at break | 7.3 | % |
| Flexural modulus | 2770.0 | MPa |
| Flame rating | V1 UL94 rating at 1.5 mm | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- No drying value was confirmed by extraction; review the source.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 250 - 285 °C; mold temperature 40 - 65 °C. Verify the source, grade and conditions.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Melt temperature：page 1
- Mold temperature：page 1
