Amorphous thermoplastic polyimide resin
EXTEM™ Resin XH2315 PI-GF30
Manufacturer：沙特基础工业公司
优异的机械、电气和尺寸性能，良好的化学性能，固有阻燃性，符合RoHS标准
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.52 | g/cm³ |
| Melt flow rate | 4.0 | g/10min |
| Tensile strength | 147.0 | MPa |
| Tensile modulus | 10500.0 | MPa |
| Elongation at break | 2.0 | % |
| Flexural modulus | 9000.0 | MPa |
| HDT 1.8MPa | 257.0 | °C |
| HDT 0.45MPa | 254.0 | °C |
| Vicat softening point | 267.0 | °C |
| Flame rating | UL94 V0 ratings at 0.75 mm and V0,5VA at 1.0 mm and 1.5-1.65 mm | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.
- Storage
- Confirm packaging, temperature and humidity, shelf life, and handling after opening.
- Drying
- Confirm whether drying is required, plus temperature, time, dew point and target moisture.
- Equipment setup
- Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
- Applications
- Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.
