Polyphenylene Sulfide (PPS)

LNP™ THERMOTUF™ Compound OF006IXQ

Manufacturer:Not recorded

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.51g/cm³
Melt flow rate21.0g/10min
Tensile strength150.0MPa
Tensile modulus10100.0MPa
Elongation at break2.5%
Flexural strength220.0MPa
Flexural modulus9300.0MPa
Notched impact strength15.0kJ/m²
HDT 1.8MPa275.0°C
HDT 0.45MPa260.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 120 - 140 °C; time 3 - 5 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 310 - 330 °C; mold temperature 130 - 160 °C. Verify the source, grade and conditions.
Applications
Candidate application areas in the source: automotive, electrical and electronics. Verify the source, exact use and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 2
  • Drying time:page 2
  • Melt temperature:page 2
  • Mold temperature:page 2
  • Application areas:page 2