Looking for a reliable supplier or an alternative grade? Tell us what you need

Polypropylene

47/7-04 D008

Manufacturer:Not available in English

Copolymer

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density0.78g/cm³
Tensile strength10.0MPa
Tensile modulus1000.0MPa
Elongation at break1.0%
Notched impact strength5.0kJ/m²
HDT 1.8MPa60.0°C
HDT 0.45MPa95.0°C
Vicat softening point95.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 70 - 90 °C; time 3 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 180 - 200 °C; mold temperature 40 - 60 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1