Looking for a reliable supplier or an alternative grade? Tell us what you need

PP

7H2-V2HF

Manufacturer:Not available in English

{'Processing': 'Injection Molding', 'Additives': 'Flame retarding agent', 'Special_Characteristics': 'Heat stabilized or stable to heat', 'Features': 'Homopolymer', 'Regional_Availability': 'Europe'}

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density0.98g/cm³
Tensile strength30.0MPa
Tensile modulus1900.0MPa
Elongation at break60.0%
Notched impact strength1.5kJ/m²
HDT 1.8MPa60.0°C
HDT 0.45MPa100.0°C
Vicat softening point100.0°C
Flame rating{'GWFI': '960 °C', 'GWFI_thickness_tested_1': '1 mm', 'GWFI_thickness_tested_2': '2 mm', 'UL_94_Flame_rating': 'V-2', 'Thickness_tested': '0.75 mm', 'Limiting_Oxygen_Index': '25 %'}—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 80 - 90 °C; time 3 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 180 - 210 °C; mold temperature 30 - 50 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1