Polypropylene

PP_LATENE EP 7-V2HF

Manufacturer:Not recorded

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density0.95g/cm³
Tensile strength22.0MPa
Tensile modulus1300.0MPa
Elongation at break100.0%
Notched impact strength6.0kJ/m²
HDT 1.8MPa55.0°C
HDT 0.45MPa90.0°C
Vicat softening point75.0°C
Flame rating{'UL_94_Flame_rating': 'V-2', 'Glow_Wire_Flammability_Index_GWFI': {'thickness_tested_1': '1 mm', 'thickness_tested_2': '2 mm', 'value': {'1_mm': '850 °C', '2_mm': '960 °C'}}, 'Glow_Wire_Ignition_Temperature_GWIT': {'thickness_tested_1': '1 mm', 'thickness_tested_2': '2 mm', 'value': {'1_mm': '750 °C', '2_mm': '775 °C'}}, 'Limiting_Oxygen_Index': '26 %'}—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 70 - 90 °C; time 3 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 180 - 200 °C; mold temperature 20 - 40 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1