Looking for a reliable supplier or an alternative grade? Tell us what you need

PP

RTP 152 HF

Manufacturer:Not available in English

Flame retardant

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density0.93g/cm³
Melt flow rate21.0g/10min
Tensile strength30.3MPa
Tensile modulus1586.0MPa
Flexural strength35.9MPa
Flexural modulus1241.0MPa
Notched impact strength26.7kJ/m²
HDT 1.8MPa51.7°C
Flame ratingV-2—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 79.4 °C; time 2 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 191 - 232 °C; mold temperature 32.2 - 65.6 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1