Polypropylene

PP TOTAL 3825

Manufacturer:道达尔能源

均聚物

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density0.905g/cm³
Melt flow rate30.0g/10min
Tensile strength33.1MPa
Tensile modulus1448.0MPa
Flexural modulus1517.0MPa
Notched impact strength21.4kJ/m²

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
No drying value was confirmed by extraction; review the source.
Equipment setup
Candidate injection-molding recommendations: melt temperature 200 - 232 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Melt temperature:page 1