Looking for a reliable supplier or an alternative grade? Tell us what you need

PS-HI

405AF

Manufacturer:Not available in English

Flame retardant, High impact or impact modified

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.16g/cm³
Melt flow rate15.0g/10min
Tensile strength25.5MPa
Elongation at break60.0%
Flexural strength43.2MPa
Flexural modulus2158.0MPa
Notched impact strength98.0kJ/m²
HDT 1.8MPa82.0°C
HDT 0.45MPa77.0°C
Vicat softening point83.0°C
Flame ratingV-0—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 60 - 70 °C; time 3 - 4 h; processing moisture ≤0.01 %. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 200 - 230 °C; mold temperature 40 - 60 °C. Verify the source, grade and conditions.
Applications
Candidate application areas in the source: electrical and electronics. Verify the source, exact use and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Processing moisture:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1
  • Application areas:page 1