聚苯乙烯

PS 454N

Manufacturer:斯图尔林顿

高冲击强度、高光泽

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.04g/cm³
Melt flow rate14.0g/10min
Tensile strength27.0MPa
Tensile modulus2200.0MPa
Elongation at break25.0%
Notched impact strength8.0kJ/m²
HDT 1.8MPa78.0°C
HDT 0.45MPa82.0°C
Vicat softening point82.0°C
Flame ratingHB—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
No drying value was confirmed by extraction; review the source.
Equipment setup
Candidate injection-molding recommendations: melt temperature 180 - 260 °C; mold temperature 10 - 60 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Melt temperature:page 1
  • Mold temperature:page 1