Polyester
XAREC® S 135 (PS-SY)-GF30
Manufacturer:出光兴产
Recorded properties
Record date:2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.26 | g/cm³ |
| Tensile strength | 125.0 | MPa |
| Tensile modulus | 9700.0 | MPa |
| Elongation at break | 2.0 | % |
| Flexural strength | 200.0 | MPa |
| Flexural modulus | 9800.0 | MPa |
| Notched impact strength | 12.0 | kJ/m² |
| HDT 1.8MPa | 250.0 | °C |
| HDT 0.45MPa | 270.0 | °C |
| Flame rating | {'HB_class': 'HB', 'GWFI': '725 °C', 'GWIT': '750 °C'} | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 120 °C; time 3 - 5 h. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 280 - 310 °C; mold temperature 130 - 155 °C. Verify the source, grade and conditions.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature:page 1
- Drying time:page 1
- Melt temperature:page 1
- Mold temperature:page 1