Thermoplastic Starch

Envifill® M20

Manufacturer:PSAC

可生物降解,食品接触,符合ISO 13432(生产商),符合ISO 13432(证书)

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.3g/cm³
Melt flow rate9.0g/10min
Tensile strength45.0MPa
Tensile modulus3300.0MPa
Elongation at break3.0%
Flexural strength40.0MPa
Flexural modulus3300.0MPa
HDT 1.8MPa50.0°C
HDT 0.45MPa60.0°C
Vicat softening point60.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
No drying value was confirmed by extraction; review the source.
Equipment setup
Candidate injection-molding recommendations: melt temperature 150 - 180 °C; mold temperature 25 - 40 °C. Verify the source, grade and conditions.
Applications
Candidate application areas in the source: packaging. Verify the source, exact use and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Melt temperature:page 1
  • Mold temperature:page 1
  • Application areas:page 1