Looking for a reliable supplier or an alternative grade? Tell us what you need

MC3650

MC3650

Manufacturer:Not available in English

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.04g/cm³
Melt flow rate13.0g/10min
Tensile strength44.8MPa
Tensile modulus3172.0MPa
Flexural strength55.2MPa
Flexural modulus3309.0MPa
Notched impact strength21.4kJ/m²
HDT 1.8MPa87.2°C
HDT 0.45MPa80.6°C
Vicat softening point97.8°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
No drying value was confirmed by extraction; review the source.
Equipment setup
Candidate injection-molding recommendations: mold temperature 17 - 65 °C. Verify the source, grade and conditions.
Applications
Candidate application areas in the source: packaging. Verify the source, exact use and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Mold temperature:page 1
  • Application areas:page 1