Looking for a reliable supplier or an alternative grade? Tell us what you need

Vampstyr 0023 V0 DF A

Vampstyr 0023 V0 DF A

Manufacturer:Not available in English

Flame retardant, High impact or impact modified, U.V. stabilized or stable to weather

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.15g/cm³
Tensile strength20.0MPa
Tensile modulus2200.0MPa
Elongation at break30.0%
Flexural strength40.0MPa
Flexural modulus2300.0MPa
Notched impact strength7.0kJ/m²
HDT 1.8MPa70.0°C
Vicat softening point90.0°C
Flame ratingV-0 class—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 50 °C; time 2 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 200 °C; mold temperature 50 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1