Looking for a reliable supplier or an alternative grade? Tell us what you need

TPV

XELTER® V 410/420A40-XXX-YYY-G2

Manufacturer:Not available in English

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density0.9g/cm³
Tensile strength2.7MPa
Tensile modulus1.1MPa
Elongation at break300.0%

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 80 °C; time 3 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 180 - 200 °C; mold temperature 20 - 40 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1