PP-(GF+MX)40
PP-GF+MX40_Borcycle™ WC4585SY_AS
Manufacturer：博瑞利斯公司
高性能混合增强
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.28 | g/cm³ |
| Melt flow rate | 5.0 | g/10min |
| Tensile strength | 60.0 | MPa |
| Tensile modulus | 7000.0 | MPa |
| Notched impact strength | 7.5 | kJ/m² |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 80 °C; time 2 h. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 230 - 280 °C. Verify the source, grade and conditions.
- Applications
- Candidate application areas in the source: construction. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 1
- Drying time：page 1
- Melt temperature：page 1
- Application areas：page 1
