ABS+PA
Triax 1185
Manufacturer：INEOS Styrolution
注塑成型
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Melt flow rate | 11.0 | g/10min |
| Tensile strength | 33.7 | MPa |
| Tensile modulus | 15.4 | MPa |
| Flexural modulus | 1317.0 | MPa |
| Notched impact strength | 801.0 | kJ/m² |
| HDT 1.8MPa | 82.2 | °C |
| HDT 0.45MPa | 51.1 | °C |
| Vicat softening point | 196.0 | °C |
| Flame rating | HB | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- No drying value was confirmed by extraction; review the source.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 238 - 271 °C; mold temperature 37.8 - 93.3 °C. Verify the source, grade and conditions.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Melt temperature：page 1
- Mold temperature：page 1
