ABS+PA合金
Triax 1120
Manufacturer：INEOS 斯蒂罗卢顿
抗疲劳性，化学抗性，通用化学抗性
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Melt flow rate | 6.5 | g/10min |
| Tensile strength | 40.0 | MPa |
| Tensile modulus | 56.9 | MPa |
| Flexural modulus | 1172.0 | MPa |
| Notched impact strength | 74.7 | kJ/m² |
| HDT 1.8MPa | 87.8 | °C |
| HDT 0.45MPa | 62.2 | °C |
| Flame rating | HB | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- No drying value was confirmed by extraction; review the source.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 238 - 271 °C; mold temperature 37.8 - 65.6 °C. Verify the source, grade and conditions.
- Applications
- Candidate application areas in the source: automotive. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Melt temperature：page 1
- Mold temperature：page 1
- Application areas：page 1
