ABS (丙烯腈-丁二烯-苯乙烯共聚物)
ABS-CF8
Manufacturer：艾文特公司
增加的电导率，抗静电
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.07 | g/cm³ |
| Tensile strength | 68.9 | MPa |
| Tensile modulus | 4830.0 | MPa |
| Elongation at break | 2.5 | % |
| Flexural strength | 82.7 | MPa |
| Flexural modulus | 4690.0 | MPa |
| Notched impact strength | 64.0 | kJ/m² |
| HDT 1.8MPa | 98.9 | °C |
| HDT 0.45MPa | 96.1 | °C |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- No drying value was confirmed by extraction; review the source.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 221 - 232 °C. Verify the source, grade and conditions.
- Applications
- Candidate application areas in the source: automotive, electrical and electronics. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Melt temperature：page 1
- Application areas：page 1
