PA6-GF15
PA6-GF15_Armamid® PA6 GF 15-1T_Polyplastic_1
Manufacturer:Not available in English
High mechanical and electrical properties; self-attenuates after the ignition source is exterminated; is resilient to nonpolar solvents, hydrocarbons (kerosene, gasoline, benzene etc.), mineral oils, strong and weak alkali, weak acids.
Recorded properties
Record date:2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.22 | g/cm³ |
| Melt flow rate | 16.0 | g/10min |
| Tensile strength | 120.0 | MPa |
| Elongation at break | 4.0 | % |
| Notched impact strength | 6.0 | kJ/m² |
| HDT 1.8MPa | 180.0 | °C |
| HDT 0.45MPa | 205.0 | °C |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- No drying value was confirmed by extraction; review the source.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 260 °C; mold temperature 80 °C. Verify the source, grade and conditions.
- Applications
- Candidate application areas in the source: automotive, electrical and electronics. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Melt temperature:page 1
- Mold temperature:page 1
- Application areas:page 1