ABS
Absolac® 380
Manufacturer：Styrenix性能材料有限公司
高光泽，共聚物
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.04 | g/cm³ |
| Melt flow rate | 40.0 | g/10min |
| Tensile strength | 51.5 | MPa |
| Tensile modulus | 2649.0 | MPa |
| Flexural strength | 73.6 | MPa |
| Flexural modulus | 2551.0 | MPa |
| Notched impact strength | 196.0 | kJ/m² |
| HDT 1.8MPa | 97.0 | °C |
| HDT 0.45MPa | 93.0 | °C |
| Vicat softening point | 98.0 | °C |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- No drying value was confirmed by extraction; review the source.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 220 - 260 °C; mold temperature 60 - 80 °C. Verify the source, grade and conditions.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Melt temperature：page 1
- Mold temperature：page 1
