ABS
ColorFast® FRA203
Manufacturer：Americhe工程化合物
阻燃，光稳定或对光稳定
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.2 | g/cm³ |
| Melt flow rate | 5.0 | g/10min |
| Tensile strength | 41.4 | MPa |
| Elongation at break | 15.0 | % |
| Flexural strength | 63.4 | MPa |
| Flexural modulus | 2275.0 | MPa |
| Notched impact strength | 267.0 | kJ/m² |
| HDT 1.8MPa | 76.7 | °C |
| Flame rating | V-0 | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 71.1 - 82.2 °C; time 3 - 4 h. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 193 - 232 °C; mold temperature 71.1 - 82.2 °C. Verify the source, grade and conditions.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 1
- Drying time：page 1
- Melt temperature：page 1
- Mold temperature：page 1
