Acrylonitrile styrene acrylate (ASA) polymer
Luran® S KR2950
Manufacturer：INEOS Styrolution
高表面质量，良好的冲击强度，增强的色牢度，优异的化学抵抗力，在紫外线照射下的优越长期性能，鲜艳的色彩，高表面光泽，增强的耐磨性
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.1 | g/cm³ |
| Melt flow rate | 10.0 | g/10min |
| Tensile strength | 49.0 | MPa |
| Tensile modulus | 2100.0 | MPa |
| Elongation at break | 3.6 | % |
| Notched impact strength | 9.0 | kJ/m² |
| HDT 1.8MPa | 96.0 | °C |
| HDT 0.45MPa | 100.0 | °C |
| Vicat softening point | 91.0 | °C |
| Flame rating | HB class | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.
- Storage
- Confirm packaging, temperature and humidity, shelf life, and handling after opening.
- Drying
- Confirm whether drying is required, plus temperature, time, dew point and target moisture.
- Equipment setup
- Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
- Applications
- Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.
