Looking for a reliable supplier or an alternative grade? Tell us what you need

acrylonitrile styrene acrylate (ASA) polymer

Luran® S 776S

Manufacturer:Not available in English

high surface quality, good impact strength, enhanced colour fastness, superior long-term performance when exposed to UV irradiation, excellent chemical resistance, good impact toughness, enables matte surface appearance

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density0.96g/cm³
Melt flow rate4.0g/10min
Tensile strength47.0MPa
Tensile modulus2200.0MPa
Elongation at break12.0%
Notched impact strength30.0kJ/m²
HDT 1.8MPa96.0°C
HDT 0.45MPa101.0°C
Vicat softening point92.0°C
Flame ratingHB class IEC 60695-11-10—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.

Storage
Confirm packaging, temperature and humidity, shelf life, and handling after opening.
Drying
Confirm whether drying is required, plus temperature, time, dew point and target moisture.
Equipment setup
Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
Applications
Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.