acrylonitrile styrene acrylate (ASA) polymer
Luran® S ECO 778TE BC30
Manufacturer：INEOS Styrolution
高表面质量，良好的冲击强度，增强的耐光性，优异的长期性能，卓越的化学抵抗力，增强的热抵抗力，在Luran® S等级中具有最佳化学抵抗力，符合ISCC标准，碳足迹减少
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.07 | g/cm³ |
| Tensile strength | 54.0 | MPa |
| Tensile modulus | 2500.0 | MPa |
| Elongation at break | 8.0 | % |
| Flexural strength | 80.0 | MPa |
| Flexural modulus | 2450.0 | MPa |
| Notched impact strength | 15.0 | kJ/m² |
| HDT 1.8MPa | 103.0 | °C |
| HDT 0.45MPa | 106.0 | °C |
| Vicat softening point | 104.0 | °C |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.
- Storage
- Confirm packaging, temperature and humidity, shelf life, and handling after opening.
- Drying
- Confirm whether drying is required, plus temperature, time, dew point and target moisture.
- Equipment setup
- Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
- Applications
- Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.
